Integration of water treatment equipment:

 Integrated water management equipment used in the membrane bioreactor technology is a biological treatment and membrane separation technology combining a new process, replacing the traditional process in the secondary settling tank, which can efficiently carry out solid-liquid separation, obtained directly Use of the stability of water. But also in the biological tanks to maintain a high concentration of microbial biomass, less surplus sludge process very effectively remove ammonia, suspended solids and turbidity of the water close to zero, the water to remove bacteria and viruses were significantly low energy consumption, Small footprint. Suitable for residential quarters, office buildings, shopping malls, hotels, restaurants, offices, schools, military units, factories, etc. Similarly sewage and industrial wastewater, such as textile, beer, paper, leather, food, organic chemical industry Sewage treatment.
By treatment, the water treatment process is generally divided into 3 types:
　　1 ．Physical treatment methods:
 Membrane filtration method for large changes in water quality conditions.
 This process is characterized by: device compact, easy to operate, and little affected by load variations.
 Membrane filtration is the action of external forces, was separated from the solution to a certain velocity along the membrane surface flow, the solution solvent and low molecular weight substances, inorganic ions through the membrane from the high side into the low side, and as the discharge filtrate ; the solution of polymer material, such as colloidal particles and microbial membrane was retained, the solution is concentrated and excreted in concentrated form.　　2 ．Physical and chemical methods:
 Changes in water quality for the larger situation. Commonly used methods are: sand filter, activated carbon adsorption, flotation, coagulation and precipitation. This process is characterized by: using hollow fiber ultrafilter for processing, advanced technology, compact structure, small footprint, system of intermittent and management simple.

　　3 ．Biological treatment
 For higher organic content of sewage. General use of activated sludge, contact oxidation, biological treatment methods such as rotating biological contactors. Or used alone, or some combination of biological treatment methods, such as contact oxidation + biological filter; biological filter + activated carbon adsorption; dial ten sand filtration and other processes. This process has the ability to adapt to changes in hydraulic loading, resulting in less sludge, the advantages of easy maintenance and management.  

 Equipment designed mainly for domestic sewage and industrial organic wastewater treatment similar, the main processing means is the use of biological treatment is currently very mature technical contact oxidation, water quality parameters of wastewater quality of life according to the general design calculations, water BOD5 by 200mg / L Meter, water BOD5 at 20mg / L of dollars. There are six components: (1) the primary settling tank (2) contact oxidation pool (3) secondary sedimentation tank (4) pool disinfection, sterilization equipment (5) sludge pond (6) fan room, fans.
 Structure and features:

     The equipment for the underground set up, maintain and repair more difficult, so the design of the device to consider its no maintenance, the equipment structure is reasonable and reliable, while also taking into account even if the occurrence of some failures, also available through the device of the inspection Within the hole into the device. Equipment, all facilities are set in a number of cabinets, cabinet is A3 steel plate, seamless steel pipe connection of the cabinet and equipment are used inside and outside the Ministry of Chemical Industry to promote their products chlorosulfonated polyethylene anti-corrosion coatings. Corrosion life-expectancy of up to 10 years.

KT biochemical processes in water

 Process characteristics:
 * strong resistance to shock loading, high purification efficiency, the system is stable, odorless process;
 * simple processes and structures to achieve integration, to achieve unattended;
 * No sludge acclimation, biofilm easy, Tuomo fast, fast growth of microorganisms, start time is short;
 * Small footprint, low investment, low operating costs;
 * sludge from a dynamic equilibrium, without the outer row of sludge;

MBR water flow:

 Process characteristics:
 * high-quality and stable water quality.
 * No residual sludge.
 * small area, not limited venues.
 * can be difficult to remove ammonia and the degradation of organic matter.
 * operation and management easy, easy to implement.

 Batch Reactor

　　Intermittent aeration activated sludge process to remove pollutants in the mechanism of SBR and conventional activated sludge process exactly the same, just run in different ways. The traditional process using a continuous operation mode, SBR process using intermittent operation mode, intermittent sewage discharged into the treatment system and intermittent high degree of automation. Therefore, a continuous flow method than the fast response, high efficiency, resistance to impact load capability; SBR method process short, simple structure, it does not require specialized sedimentation tank and adjust the pool, no sludge return, low operating costs.
 Membrane bioreactor